Testing technology - future focused:
Our products are tried and trusted, tested and proven. The most common and popular are listed below but the list is far from exhaustive. If you have a need that is not met by the list below please contact
sales@detectortesters.com to discuss further. See also
technology and tomorrow The ultimate kit, offering everything needed for removing, replacing and testing of smoke and heat detectors up to 9 metres. The Solo 823 includes:
1 x Solo 100 – Fibreglass four section telescopic pole (4.5...
A universal kit for removing, replacing and testing of smoke and heat detectors up to 6 metres. The Solo 822 includes:
1 x Solo 100 – Fibreglass four section telescopic pole (4.5 metres)
1 x Solo 200...
A universal kit for removing, replacing and testing of smoke and heat detectors up to 6 metres. The Solo 814 includes:
1 x Solo 100 – Fibreglass four section telescopic pole (4.5 metres)
1 x Solo...
A universal kit for removing, replacing and testing of smoke detectors up to 8 metres. The Solo 812 includes:
1 x Solo 100 – Fibreglass four section telescopic pole (4.5 metres)
2 x Solo 101 –...
A universal kit for removing, replacing and testing of smoke detectors up to 6 metres. The Solo 811 includes the following:
1 x Solo 100 – Fibreglass four section telescopic pole (4.5 metres) ...
A starter kit for testing smoke detectors up to 2.5 metres. The Solo 810 includes the following:
1 x Solo 101 – Fibreglass extension pole (1.13 metres)
1 x Solo 330 – Aerosol smoke dispenser ...
A starter kit for testing smoke detectors up to 6 metres. The Solo 809 includes the following:
1 x Solo 100 – Fibreglass four section telescopic pole (4.5 metres)
1 x Solo 330 – Aerosol smoke...
A starter kit for testing smoke detectors up to 4 metres. The Solo 808 includes the following:
1 x Solo 108 – Fibreglass two section telescopic pole (2.5 metres)
1 x Solo 330 – Aerosol smoke...
The Solo 330 dispenser is the most popular device, benefiting as it does, from a cup big enough for the great majority of detectors (particularly with the patented silicon diaphragm to enclose the sensing chamber) but still small enough not to be...
Using the same design and offering all the benefits of the Solo 330 the larger cup of Solo 332 is designed specifically for testing detectors up to 13.3cm / 5.25' in diameter.
Dispenser and patented diaphragm...
Famous for being 'the most thoroughly researched smoke test aerosol in the market', Solo A3 (A4) is non-flammable and is proven not to cause damage such as stress cracking to detectors. Importantly it has a very fast clearing time, saving very significant...
Solo C3 is formulated for use with the Solo 330 Dispenser. This prevents dissipation of the CO, which would occur if used handhel
The cordless Solo 461 is the most technologically advanced solution currently in the market. Its testing capabilities are second to none with design protected by several patents. This is not just a device that uses rechargeable (NiMH) batteries to...
There are also occasions where a lower price is required and where the disadvantages of cords and cables can be accepted. In this instance our 110 / 120V or 220V / 240V units lead the field.
Suits fixed...
Over time this universal removal tool has proven itself not just compatible with 'current detectors' but also well able to accommodate new detectors as they are launched - with no changes required to the products already in the field.
...
Four sections
Extends from 1.26m to 4.5m
Enables access to detectors fitted up to 6m / 20'
Accepts three Solo 101 to reach 9m / 30'
All Solo poles, made from...
Single section 1.13m / 3.5’
Enables access to detectors fitted up to 2.5m
Connects to Solo 100, Solo 108 or additional Solo 101s for greater heights
All Solo poles,...
Twin section
Extends from 1.26m to 2.5m / 8’
Enables access to detectors fitted up to 4m+ / 13’+
Accepts additional Solo 101’s for greater heights
...
Dirty or contaminated detectors may cause false alarms. Conversely, they may lead to delays in detection and alarm activation. Visual dirt on the outside of a detector is an indication of possible problems on the inside (although a clean outside is not...
CHEKKIT ® SMOKE is an advanced, non flammable, hand-held detector tester - using a formula which is proven to activate and clear detectors in the fastest time possible.
A quick one second spray from floor level in the direction of the...
Canned Smoke is a universal smoke detector testing product. Specifically developed for use by hand, Canned Smoke enables rapid and effective testing designed to clear quickly from a detector's sensing chambers enabling swift reset of the alarm system....
To help guarantee the performance of smoke detectors and reduce the number of false alarms from over-sensitive detectors, sensitivity should be measured in the field / on site. This statement applies equally to conventional and analogue systems.
...
Using pulse load technology Cellchecker™ provides a comprehensive test of a battery’s state of charge and condition.
Fundamentally different to traditional testers
...
Laboratory/Factory Sensitivity Testing Equipment
Detector Test Tunnels
2000 series laboratory and 1000 series compact fire detector test tunnels are equipment suitable for standards test houses and fire detector manufacturers. They are designed for accurate testing of heat and smoke point...
Detector Test Tunnels
2000 series laboratory and 1000 series compact fire detector test tunnels are equipment suitable for standards test houses and fire detector manufacturers. They are designed for accurate testing of heat and...
