How do you test multi-sensor detectors?
- no comments
With recent research proving they prevent false alarms and an increase in product choice – the number of multi-sensors being installed and requiring testing has risen significantly in the last two years.
So, how should multi-sensors be tested?
Testifire is the easiest and most productive way to achieve compliant testing in line with codes and standards.
With the increased use of multi-sensor detectors, British Standards have responded with an update to BS:5839-1 which spells out how multi-sensors should be tested:
WHERE THE DETECTOR OR SYSTEM DESIGN PERMITS, EACH SENSOR ON WHICH A FIRE DETECTION DECISION DEPENDS (E.G. SMOKE, HEAT, CO) SHOULD BE PHYSICALLY TESTED INDIVIDUALLY. BS:5839-1:2017
Stay updated – sign up for our newsletter!
You might also like
A site visit with a difference – Fire ActionA site visit with a difference – Fire Action https://www.detectortesters.com/wp-content/uploads/2019/02/Testifire-Fire-Action-780-x-488px-1.jpg 780 488 Detector Testers Detector Testers https://www.detectortesters.com/wp-content/uploads/2019/02/Testifire-Fire-Action-780-x-488px-1.jpg
On site with Testifire & Choice Fire & SecurityOn site with Testifire & Choice Fire & Security https://www.detectortesters.com/wp-content/uploads/2019/02/Testifire-at-Dolphin-Square-780-x-488px.jpg 780 488 Detector Testers Detector Testers https://www.detectortesters.com/wp-content/uploads/2019/02/Testifire-at-Dolphin-Square-780-x-488px.jpg
Product focus: Testifire – the all-in-one testerProduct focus: Testifire – the all-in-one tester https://www.detectortesters.com/wp-content/uploads/2018/12/BLOG-Hero-All-in-one-tester_780-x-488px.jpg 780 488 Detector Testers Detector Testers https://www.detectortesters.com/wp-content/uploads/2018/12/BLOG-Hero-All-in-one-tester_780-x-488px.jpg